Calibrating Monitors for True Size Image Display  

Introduction

You can calibrate one imaging monitor to display true size images for all the imaging monitors for that workstation. All imaging monitors in a workstation must be the same make and model.

To display true size images, the physical dimensions of the display pixels, both vertically and horizontally, must be accurately defined. Because monitors are assumed not to have any gap between pixels, the pixel dimensions should be the same as the dimensions between the centers of adjacent pixels.

Note:

Synapse displays an alert message if the browser zoom is not 100 percent when you initially open a study or resize a window.

 

Caution:

You should verify that horizontal and vertical measurements for the square are the same measurement. Otherwise, your monitor will display skewed images. You must recalibrate your workstation if you do any of the following actions: Change the video cards. Change the display resolution of a monitor. Replace your monitor with a monitor of a different make and model. Move the Viewer window from one monitor to another monitor with a different resolution or different make and model. You must enter the new calibration value for each combination of browser and Windows user.

Steps

1. To access User Settings, do one of the following:

If you want to do this...	Complete these steps...
Open User Settings from the Viewer.	Right-click User Settings .
Open User Settings from the Worklist.	Click  User Settings on the Worklist toolbar.
Open User Settings from PowerJacket.	Click  User Settings on the PowerJacket toolbar.

2. Verify that the browser zoom is at 100 percent. See Ensuring the Browser Zoom Factor is 100 Percent.
3. Click the Image Display and select True Size Calibration.
4. Follow the instructions in the True Size Calibration panel.

Results

Your monitor is calibrated for true size provided that you do not change the browser zoom or video configuration.

Note:

If your monitor is not calibrated, the option Zoom True Size is not available.

Synapse displays the following message to alert you that an action must be taken for the settings to apply: Refresh the Synapse browser window for settings to apply.

Related Topics

Changing the Zoom Factor

Configuring Viewer Position and Size

Ensuring the Browser Zoom Factor is 100 Percent

 

Synapse Users Guide

FUJIFILM Healthcare Americas Corporation

Note: Available options and features depend on your environment, roles, privileges, and browser.